![]() ![]() Just copy and paste into yours so that it matches, but change the GatewayID to whatever you would like in both files. We need to duplicate this file for our second daemon.ĩ) Rather then discuss what each line in the wifidog file represents, I'll post an output of both of the files on my device. If it's all good so far, then carry onĨ) Wifidog should install a config file to /etc/nf after you install the package. If any of these conditions are not met on your device, go back and start over. Since we have not yet setup wifidog, you should be able to connect to the internet using either SSID. You should be able to connect to either one, and you should get an IP in a different subnet depending on which one you are connected to. ![]() When it comes up, you should have 2 seperate SSIDs being broadcast. Option resolvfile '/tmp/'Īlright, so we now have our VLANs, SSIDs, firewall rules, DHCP bindings, and IP configs setup. Option filterwin2k '0' #enable for dial on demand ![]() Feel free to set this up how you choose:Ĭlose and save your file (control x, then y and enter) As you can see, one of mine is encrypted, one is not. To start, change to your config directoryĤ) We'll first setup our SSIDs. I also prefer to edit files using nano, so we'll install that as well:ģ) Next we'll setup our SSIDs, firewall rules, etc. ![]() The package in the repos is kind of old but still accomplishes what we need done. It is also assumed that you have a basic understanding of how wifidog works/what it does, and have already setup your authentication server on a separate box that is accessible from the internet.ġ) First, let's update our package list with the following command:Ģ) Next let's install the wifidog daemon. You also have an IP address configured and your device is able to access the web. I won't go into flashing/basic setup instructions since this is covered elsewhere, so this assumes that you have already flashed your device with Backfire and are able to SSH into it. We are using the 2.4 kernel, and the proprietary broadcom driver. dual SSIDs, 1 encrypted, 1 not (we use 1 for staff, one for guests) dual wifidog daemons, each bound to a different SSID Anyways, I'll provide the output of my configs for anyone who is interested. Thankfully the process is seamless, just had to update my opkg sources and re-install a couple of things. I setup this up a little while ago on Kamikaze, and have recently migrated my units to backfire. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |